Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.2 Opening the Device
Disengage the top part of the housing on
both sides using the screwdriver.
Pull out the top part of the housing and
the electronics section until they lock.
3.3 Settings
Set the input / output range using
DIP switches S1 and S2 as indicated in
the table.
Input
Output
0 to ±20 mA
0 to ±20 mA
0 to ±20 mA
0 to ±10 V
0 to ±10 V
0 to ±20 mA
0 to ±10 V
0 to ±10 V
Empty field = OFF
The selected range can be documented on rating plate and front label.
Factory setting: 0 ... ±10 V, 0 ... ±10 V, 5 kHz
16
S1
1
2
3
ON
ON
ON
ON
ON
ON
S2
1
2
3
ON
ON
ON
ON
Publicité
Table des Matières
