General Informations - Consort R3610 Mode D'emploi

General informations

Introduction
This instrument is manufactured with the latest technology and needs no
particular maintenance. Consort certifies that this instrument was thoroughly
inspected and tested at the factory prior to shipment and found to meet all
requirements defined by contract under which it is furnished. However,
dimensions and other physical characteristics may differ.
The normal operating temperature should be between 0° and 40°C. Never use the
instrument in a room with high humidity (>95 %) or at very low temperatures
(condensation water!).
Manufacturer
Consort bvba
Parklaan 36
B2300 Turnhout
Belgium
Warranty
This instrument (excluding all accessories) is warranted against defective material
and workmanship for a period of thirty-six (36) months from the date of shipment
ex factory. Consort will repair all defective equipment returned to it during the
warranty period without charge, provided the equipment has been used under
normal laboratory conditions and in accordance with the operating limitations and
maintenance procedures in this instruction manual and when not having been
subject to accident, alteration, misuse or abuse. A return authorisation must be
obtained from Consort before returning any product for warranty repair on a
freight prepaid basis!
Consort is not liable for consequential damages arising out of the use or handling
of its products.
Servicing
In the event of this instrument being returned for servicing, the owner is
requested NOT to send the following items unless they are suspect:
Manual
Cables
Accessories
If serious malfunctioning occurs, stop using the unit immediately and consult your
local Consort dealer.
Keyboard
SET = Selects all settings or escapes from error traps, calibration
procedures, etc..by returning to the original setting.
é ê = Button for entering a value or for selecting a function.
CAL = Starts or proceeds a calibration or a function.
OK = Proceeds a function.
STOP = Stops the control without interrupting the measurements.
HELP = Built-in manual.
Tel (+32)(14)41 12 79
Fax (+32)(14)42 91 79
E-mail: info@consort.be
1