Before Commissioning; Storage And Transport - SECOH ATB-80 Instructions De Service

Instruction Manual ATB-80, ATB-100, ATB-120

3.1 Before commissioning

This pump has been developed for operation using
•
air only! Attention is to be paid that no flammable
gases, liquids or other particles can get into the
inside of the pump:
Please note the type plate on the outside of the pump
•
casing!
This pump is not developed for mounting on vehicles.
•

3.2 Storage and transport

The pump should be held with both hands when
•
transported. Do not hold the pump at the filter cover. This
can slip and through this cause damage. Do not transport the
pump using the electrical cable.
The pump may not be stored below -10 degrees Celsius.
•
Below this temperature the pump magnets become weakened,
whereby the pump performance is also weakened.
During storage the pump should not be subjected to direct sunlight.
•
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com
Art.-Nr.: 9060 0306 / Version: 17.08.2020 / Page 23 de 48
ENGLISH