Transport - Belling SC 900 DFT Manuel D'utilisation

Lamp has failed. Replace lamp according to the instructions.
Oven light (if
avaliable) does not
Electrical supply is disconnected or Make sure the electrical supply is turned on at wall
operate.
switched off. socket outlet.
If there is foreign matter caught
between the timer buttons Remove the foreign matter and try again.
The timer buttons
cannot be pressed Touch model: if there is moisture on Remove the moisture and try again.
properly. the control panel
Check whether the lock function is set.
If the key lock function is set
Check that the oven is level.
The oven fan (if
Oven shelves are vibrating.
Check that the shelves and bakeware are not
avaliable) is noisy.
vibrating in contact with the oven back panel.

6.2. Transport

If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging; prepare a carriage box so that the appliance,
especially the external surfaces of the product, are protected against external threats.
EN - 27