Belling SC 900 DFT Manuel D'utilisation page 92

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To alter the signal beep, while the timer
shows the time of day press and hold the
´-` button for 1-2 seconds until an audible
signal beep sounds. After that each time the
´-` button is pressed a different signal beep
is sounded. There are three different types
of signal beep. Select the desired signal
beep and do not press any other buttons.
After a short time, the selected signal beep
will be saved.
Deep Tray
The deep tray is used when cooking stews.
To locate the tray correctly in the cavity, put
it to any rack and push it up to the end.
Flap Drawer
Your appliance has a drawer to store
accessorries like trays, shelves, grids, small
pots and pans.
WARNING: The inside surface of
drawer may become hot during use.
Do not store any food, plastic or
inflammable materials in the drawer.
Grill Pan and Handle Set
The grill pan set is used when grilling
steaks, etc.
WARNING: The grill pan has a
detachable handle. Make sure when
using the grill pan handle that it is
centralised and secure as shown in the
figure. Do not leave the handle in position
when grilling.
Splashback
The splashback is attached to the cooktop
with two screws.
Wire Grid
The wire grid is used when grilling or
processing food in other containers.
WARNING: The wire grid is used
when grilling or processing food in
other containers.
Wok Adaptor
The wok adaptor should be placed on the
pan support of the wok burner.
EN - 22

Publicité

Table des Matières
loading

Produits Connexes pour Belling SC 900 DFT

Ce manuel est également adapté pour:

Be444444690Be444444691Be444444692Be444444693Be444444694

Table des Matières