During Usage - Belling SC 900 DFT Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Protect your appliance against atmospheric effects.
Do not expose it to effects such as sun, rain, snow,
excessive humidity etc.
• The material around the appliance (cabinet) must be
able to withstand a minimum temperature of 100°C.

1.3. During Usage

• When you first use your Oven you may notice a
slight smell. This is perfectly normal and is caused
by the insulation materials on the heater elements.
We suggest that before using your Oven for the
first time you leave it empty, and set at maximum
temperature for 45 minutes. Make sure that the
environment in which the product is installed is well
ventilated.
• Take care when opening the oven door during or
after cooking. The hot steam from the oven may
cause burns.
• Do not put flammable or combustible materials in or
near the appliance when it is operating.
• Always use oven gloves to remove and replace food
in the oven.
Do not leave the cooker unattended while
cooking with solid or liquid oils. They may catch fire
under extreme heating conditions. Never pour water
on to flames that are caused by oil, instead switch
the cooker off and cover the pan with its lid or a fire
blanket.
• Always position pans over the centre of the cooking
zone, and turn the handles to a safe position so they
cannot be knocked or grabbed.
If the product will not be used for a long period of
time, turn the main control switch off. Also when not
using a gas appliance, turn the gas valve off.
EN - 8

Publicité

Table des Matières
loading

Produits Connexes pour Belling SC 900 DFT

Ce manuel est également adapté pour:

Be444444690Be444444691Be444444692Be444444693Be444444694

Table des Matières