Belling SC 900 DFT Manuel D'utilisation page 76

out by authorised service technicians. Installation
and repair work that is carried out by unauthorised
technicians may be dangerous. Do not alter or
modify the specifications of the appliance in any
way. Inappropriate hob guards can cause accidents.
• Before connecting your appliance, make sure
that the local distribution conditions (nature of the
gas and gas pressure or electricity voltage and
frequency) and the specifications of the appliance
are compatible. The specifications for this appliance
are stated on the label.
CAUTION: This appliance is designed only for
•
cooking food and is intended for indoor domestic
household use only. It should not be used for any
other purpose or in any other application, such as
for non-domestic use or in a commercial
environment or room heating.
• Do not use the oven door handles to lift or move the
appliance.
• This appliance is not connected to a ventilation
device. It shall be installed and connected in
accordance with current installation regulations.
Particular attention shall be given to the relevant
requirements regarding ventilation.
• If the burner has not lit after 15 seconds, stop
operating the device and open the compartment
door and/or wait at least 1 minute before attempting
a further ignition of the burner.
• These instructions are only valid if the correct
country symbol appears on the appliance. If the
symbol does not appear on the appliance, refer to
the technical instructions which describe how to
modify the appliance to match the conditions of use
of the country.
EN - 6