Anti-Tilting Kit; Adjusting The Feet - Belling SC 900 DFT Manuel D'utilisation

Blue
Brown

2.6. Anti-tilting kit

1
Anti-tilting
Bracket
(x1) (will be
attached to the
wall)
The document bag contains an anti-tilting
kit. Loosely attach the anti-tilting bracket (1)
to the wall using the screw (2) and dowel
(3), following the measurements shown in
the figure and table below. Adjust the height
of the anti-tilting bracket so that it lines up
with the slot on the cooker and tighten the
screw. Push the appliance towards the wall
making sure that the anti-tilting bracket is
inserted into the slot on the appliance.
A
Wall
Yellow+Green
2
Screw (x1)
3
Dowel (x1)
Anti-
tilting
bracket
B
Product Dimensions
(Width X Depth X Height) (Cm)
60x60x90 (Double Oven)
50x60x90 (Double Oven)
90x60x85
60x60x90
60x60x85
50x60x90
50x60x85
50x50x90
50x50x85

2.7. Adjusting the feet

The appliance is supplied with 4 adjustable
feet. Attach the feet to the bottom panel
support by rotating clockwise as shown in
the figure.
For safe operation, it is important that your
appliance is safe and balanced. Make sure
the appliance is level prior to cooking.To
increase the height of the appliance, turn
the inner part of the feet anti-clockwise. To
decrease the height of the appliance, turn
the inner part of the feet clockwise.
It is possible to raise the height of the
appliance 50 mm by adjusting the feet. The
appliance is heavy and we recommend that
a minimum of 2 people lift it. Never drag the
appliance.
EN - 15
A (mm) B (mm)
297.5 52
247.5 52
430 107
309.5 112
309.5 64
247.5 112
247.5 64
247.5 112
247.5 64
Inner part