Belling SC 900 DFT Manuel D'utilisation page 94

• Wipe the hotplate with a soft cloth
soaked in only water. Then run
the hotplate for a short time to dry
completely.
Cleaning the Glass Parts
• Clean the glass parts of your appliance
on a regular basis.
• Use a glass cleaner to clean inside and
outside of the glass parts, then rinse
and dry them thoroughly with a dry
cloth.
Cleaning the Enamelled Parts
• Clean the enamelled parts of your
appliance on a regular basis.
• Wipe the enamelled parts with a soft
cloth soaked in soapy water. Then wipe
them over again with a wet cloth and
then dry them.
• Do not wash the enamelled parts
when they are still hot from
cooking.
• Do not leave vinegar, coffee, milk,
salt, water, lemon or tomato juice
on the enamel for a long time.
Cleaning the Stainless Steel Parts (If
avaliable)
• Clean the stainless steel parts of your
appliance on a regular basis.
• Wipe the stainless steel parts with a soft
cloth soaked in only water. Then dry
them thoroughly with a dry cloth.
• Do not wash the stainless steel
parts when they are still hot from
cooking.
• Do not leave vinegar, coffee, milk,
salt, water, lemon or tomato juice
on the stainless steel for a long
time.
Removal of inner Glasses
Before cleaning the oven door glass, you
must remove the inner glass as shown:
1. Push the glass towards direction B and
release from the location bracket (x). Pull
out the glass towards direction A.
To replace the inner glass;
2. Push the glass towards and under the
under the location bracket (y) towards to
direction B.
3. Place the glass under the location
bracket (x) towards to direction C.
If the oven door is a triple glass oven
door, the third glass layer can be
removed the same way as the second
glass.
Removal of Oven Door
Before cleaning the oven door glass, you
must remove the oven door as shown:
1. Open the oven door.
2. Open the saddle bracket (a)(with the aid
of a screwdriver) up to the end position.
EN - 24
A
x
B
B
y
x
C