Belling SC 900 DFT Manuel D'utilisation page 91

so that cooking finishes at a set time. You
can set an end time up to 10 hours after the
current time. Prepare the food for cooking
and put it in the oven.
1. Select the desired cooking function and
the temperature by turning the control
knobs.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol ´A` and
Turn both control knobs to position ´0`
and press any key on the timer to stop the
audible warning. The symbol will disappear
again and the timer will switch back to
manual function.
Full-automatic programming
This function is used to cook after a certain
period of time and within a certain duration.
A time up to 10 hours after the actual time
can be set. Prepare the food for cooking
and put it in the oven.
1. Select the desired cooking function and
the temperature by turning the control
knobs.
2. Press MODE until
you see ´end/ ` on
the screen. ´A` and the
days time will flash.
3. The current time
reappears on the
screen, ´A` and light
continuously.
4. The current time
reappears on the
screen, ´A`, and
light continuously.
will flash.
2. Press MODE until
you see ´dur/ `on the
screen. The symbol
´A` will flash.
The oven will calculate the time and
automatically start the oven so that cooking
finishes at the set finishing time. When the
timer reaches zero, the oven will switch
off and an audible warning will sound. The
symbol ´A`,
knobs to position ´0` and press any key
to stop the audible warning. The symbol
will disappear and the timer switch back to
manual function.
Sound Adjustment
EN - 21
3. Select the desired
cooking time period
using the ´-` and ´+`
keys.
4. The current time
reappears on the
screen, ´A`,
light continuously.
5. Press MODE until
you see ´end/
the screen. ´A`,
the time will flash.
6. Select the desired
finishing time using the
´-` and ´+` keys.
7. Add the cooking
period to the actual
time. You can set a
time up to 23 hours
and 59 minutes after
this.
8.The current time
reappears on the
screen, ´A`,
light continuously.
will flash. Turn both control
and
` on
and
and