Setting The Timer - DeLonghi DD1000TC Mode D'emploi

SETTING THE TIMER

2. Setting the Right-Side Carafe: Press the PROG button once. The right-side
TIMER light on the control panel and the number on the digital display will start
flashing. Press the "H" button until the desired brew time hour is reached.
Then press the "M" button until the desired minutes have been reached.
NOTE: Be sure to check the AM / PM indicator, located on the left side of the
digital clock display. Once the desired time has been reached, wait 5 seconds
after flashing stops and the right-side TIMER light will stay illuminated. To
confirm and activate the preset brew time, press the SET button and it will
display your pre-programmed time. Once the SET button has been pressed,
this immediately activates the automatic brew mode. When it is brewing time,
the right-side TIMER light will turn "off" and the right-side ON/OFF light will
illuminate. The brewing cycle will start.
3. Setting the Left-Side Carafe: Press the PROG button twice. The left-side
TIMER light and the number on the digital display will start flashing. Press the
"H" button until the desired brew time hour is reached. Then press the "M"
button until the desired minutes have been reached. NOTE: Be sure to check
the AM / PM indicator, located on the left side of the digital clock display. NOTE:
Once the desired time has been reached, wait 5 seconds after flashing stops
and the left-side TIMER light will stay illuminated. To confirm and activate the
preset brew time, press the SET button and it will display your pre-pro-
grammed time. Once the SET button has been pressed, this immediately
activates the automatic brew mode. When it is brewing time, the left-side
TIMER light will turn "off" and the left-side ON/OFF light will illuminate. The
brewing cycle will start.
4. Setting Both Carafes: Press the PROG button three times to set the timer on
both sides. Both TIMER lights and the digital display will start flashing. Press
the "H" button until the desired brew time hour is reached. Then press the "M"
button until the desired minutes have been reached. NOTE: Be sure to check
the AM / PM indicator, located on the left side of the digital clock display. Once
the desired time has been reached, wait 5 seconds after flashing stops and
the TIMER lights on both sides will stay illuminated. To confirm and activate the
preset brew time, press the SET button and it will display your pre-pro-
grammed time. Once the SET button has been pressed, this immediately
activates the automatic brew mode. When it is brewing time, both TIMER lights
will turn "off" and both ON/OFF lights will illuminate. The brewing cycle will
start on both sides.
5. NOTE: The coffee maker will save the automatic brew time unless unplugged.
(continued)
-8-