Secret Number Setting For Parental Control - Sharp LC-26DA5U Mode D'emploi

Useful adjustment settings
Secret number setting for parental
control
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable V-Chip (see
pages 35 to 40):
1 Secret No. is registered.
2 V-Chip settings have been made.
3 "Status" is set to "On".
Setting a secret number
1
Press MENU and MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Parental CTRL", and
then press ENTER.
4
Press a/b to select "Secret No.", and then
press ENTER.
[Setup ... Parental CTRL]
MENU
Secret No.
5
Select "New Secret No.", and then press
ENTER.
Input the new 4-digit secret number by using
0 – 9.
New Secret No.
6
Input the same 4-digit number on the
"Reconfirm" screen as in step 5 to confirm.
New Secret No.
7
Press RETURN to start configuring V-Chip
settings. (See pages 37 and 39 for details.)
LC-26/32DA5U(E)-33-40
– – – –
Input Secret No.
New Secret No. – – – –
Reconfirm – – – –
Input Secret No. – – – –
New Secret No.
* * * *
Reconfirm – – – –
35
Setting parental control status
Used to enable or disable the parental control function.
1
Repeat steps 1 to 3 in Setting a secret
number.
• Secret number setting menu displays.
2
Input the 4-digit secret number by using 0 –
9.
3
Press a/b to select "Status", and then press
ENTER.
4
Press c/d to select "On" or "Off", and then
press ENTER.
• Select "On" to enable and "Off" to disable
Parental CTRL.
V-Chip
Secret No.
Status
NOTE
• You can skip step 1 and 2 above while in Parental CTRL
screen.
05.7.15, 8:21 AM
On Off
35