Connecting Hdmi Equipment; Displaying An Image From Hdmi Equipment - Sharp LC-26DA5U Mode D'emploi

Using external equipment

Connecting HDMI equipment

You can use the INPUT 4 terminal when connecting an HDMI equipment.
When using an HDMI-DVI
conversion cable, input the
audio signal to AUDIO
terminal of INPUT4.

Displaying an image from HDMI equipment

1
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 29.)
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
Quick Shoot
LC-26/32DA5U(E)-25-27
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
[Low]
[Fixed]
[Off]
27
HDMI cable (commercially available)
HDMI equipment
5
Press a/b to select the desired item and
press ENTER.
6
Press a/b/c/d to select the desired setting
and press ENTER.
HDMI Setup
Selectable items
items
Signal RGB/YCbCr 4:4:4/
Type YCbCr 4:2:2
Color ITU601/ITU709
Matrix
Dynamic Standard/
Range Out of standard
Auto View Enable/Disable
Audio Digital/Analog
Select
NOTE
• Refer to your external equipment operation manual for
the signal type.
05.7.21, 7:37 AM
Description
Select the video signal
type from the HDMI
terminal.
Select the internal color
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
"Standard".
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Select "Digital" for audio
signal via the HDMI
terminal. Select "Analog"
for audio signal via the R-
AUDIO -L terminal.
27