Remote Control (Optional) - Bertazzoni KMC30X Instructions D'installation

Masquer les pouces Voir aussi pour KMC30X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The remote control is powered by a CR2032 type 3 V battery (not included).
• Do not place the remote control near heat sources.
• Do not discard the batteries with normal waste, they must be put into the specific containers.
Turns the motor On and Off.
-
-
Turns the lights On/Off.
Press and hold for 2sec to turn the Hood lights On/Off at reduced intensity.
Activates/Deactivates Intensive operation.
Brief pressure: Activates/Deactivates the Delay function: automatic switch-off with a 30' delay. The
display shows the operating speed and the dot at the bottom right flashes once a second.
Press for 2 seconds: Activates/Deactivates the 24h function: turns the suction motor on at speed one
and effects one 10 minute extraction every hour. The display shows the number 24 and the dot at the
bottom right flashes once a second.
Increases the working speed of the motor.
Decreases the working speed of the motor.
30
REMOTE CONTROL (OPTIONAL)

Publicité

Table des Matières
loading

Table des Matières