Bertazzoni KMC30X Instructions D'installation page 15

Masquer les pouces Voir aussi pour KMC30X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.c
2.1
11
10
6/16"
7/16"
3
15/16"
Mark the wall where indicated, 10 7/16" above the horizontal line and at 6 1/2" distance on the left and
right of vertical line. Checking that the two marks are level.
Insert two wall plugs and two screws into the holes as shown not completely (purchased separately).
Mark the wall where indicated, 3 15/16" above the horizontal line and at 18 14/16" distance on the left and
right of vertical line. Checking that the two marks are level. Insert two wall plugs (purchased separately).
Mark the wall where indicated, 11 6/16" above the horizontal line and at 11 11/16" distance on the left and
right of vertical line. Checking that the two marks are level. Insert two wall plugs (purchased separately).
Place a bracket 7.2.1 on the wall as shown about 1 1/8" from the ceiling or upper limit, aligning the center
(notch) with the vertical reference line and mark the wall at the centers of the holes in the bracket.
Place the second bracket 7.2.1 on the wall as shown, below the first bracket, at the height of the upper
chimney section supplied and aligning the center (notch) with the vertical line.
Mark the wall at the centers of the holes in the bracket and drill ø 5/16" as shown.
Installation screws provided for the Brackets, must be secured with wall plugs (purchased separately).
48"
5
6
7
8
18
14/16"
11
11/16"
6
6
1/2"
1/2"
5
1
3
Min.
24"
>
1 1/8"
2.1
18
14/16"
11
11/16"
6
2
4
Min.
30"
KMC48X
KMC48BI
KMC48NE
7.2.1
9 10
7 8
5 6
3 4
1 2
9 10
7 8
5 6
3 4
1 2
Ø 5/16"
x10
x10
15

Publicité

Table des Matières
loading

Table des Matières