Connecting The Power Cord - Pioneer AVH-P5200DVD Manuel D'installation

Connecting the units

Connecting the power cord

Wired remote input (WIRED REMOTE INPUT)
Hard-wired remote control adaptor can be
connected (sold separately).
Microphone (supplied)
(AVH-P5200BT only)
(13 ft. 1 in.)
4 m
Yellow
Connect to the constant 12 V supply terminal.
Orange/white
Connect to lighting switch terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Front speaker
Left
Rear speaker or
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not
connect anything to Green and Green/black leads.
4
17 cm (6-3/4 in.)
Microphone input Jack (MIC)
(AVH-5200BT only)
This product
Fuse (10 A)
White
White/black
Green
Green/black
Green
Not used.
Green/black
17 cm (6-3/4 in.)
RGB input
Fuse resistor
Fuse resistor
Gray
Gray/black
Violet
Violet/black
Violet
Violet/black
IP-BUS input
(Blue)
Front speaker
Right
Rear speaker or
Subwoofer (4 Ω)
Subwoofer (4 Ω)
× 2