Functional Description - Makita AN923 Manuel D'instruction

► 1. Pneumatic tool oil
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always lock the trigger and disconnect the hose
before adjusting or checking function on the
tool.
Nose adapter (Accessory)
CAUTION:
• Always lock the trigger and disconnect the hose
before installing or removing the nose adapter.
When nailing workpieces with easily-marred surfaces,
use the nose adapter.
Attach the nose adapter to the contact arm.
1
► 1. Contact arm 2. Nose adapter
1
2
5 ENGLISH
Adjusting depth of nailing
1
► 1. Adjuster
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with a
lower air pressure and the adjuster set to a lower depth
of nail driving.
CAUTION:
• Always lock the trigger and disconnect the hose
before adjusting the depth of nailing.
Installing the hook
1
► 1. Hook
CAUTION:
• Always lock the trigger and disconnect the hose
from the tool.
• Never hook the tool at high location or on poten-
tially unstable surface.
The hook is convenient for hanging the tool temporarily.
To use the hook, simply lift up hook until it snaps into
the open position.
When not in use, always lower hook until it snaps into
the closed position.
A
B