Editing Or Deleting User Profile; Saving Individual Drinks - Siemens TI 905 Série Mode D'emploi

en Customising
Use the rotary selector to select
8.
"default mode" or "barista mode".
Press the right navigation button to
9.
confirm the selection.
The selection prompt appears.
Press the right navigation button
10.
again to save the profile.
The user profile picture appears.
An individual drink can then be saved
immediately for the user created.

Saving individual drinks:

Press the rotary selector.
1.
The display "change beverages"
appears.
Press the right navigation button to
2.
save the profile.
Use the rotary selector to select the
3.
desired drink.
The selected drink can be adjusted in
line with personal preference.
~ "Adjusting beverage settings"
on page 17
Press the rotary selector.
4.
A prompt appears for you to confirm
the selection.
Press the right navigation button to
5.
confirm the selection.
Press the ! button.
6.
The settings are completed.
The appliance is ready for use again.
Up to 10 personal drinks can be
Note:
saved in one profile.

Editing or deleting user profile

Press the ! button. The menu
1.
appears.
Use the rotary selector to select the
2.
desired profile.
Press the left navigation button to
3.
delete the profile.
- or -
Press the right navigation button to
edit the settings in the profile.
The settings in the profile can be
changed as described. ~ "Creating a
user profile" on page 19
20
Press the ! button.
4.
The appliance is ready for use again.
Saving individual drinks
A drink that is currently being dispensed
can be saved directly in a new or
existing profile using the individual
settings.
Press and hold the ! button for at
1.
least 5 seconds.
If no profiles have yet been saved, a
new profile appears automatically.
If profiles are already saved and if
2.
the individual drink should be saved
in a new profile, use the rotary
selector to select a new profile.
- or -
If the individual drink should be
saved in an existing profile, use the
rotary selector to select the desired
profile.
Press the rotary selector to confirm
3.
the selection.
If a new profile is created, enter name
and select background picture. Confirm
the entries.
If a profile is already available, select
this and save the drink.
Press the ! button.
4.
The appliance is ready for use again.
To exit the menu automatically,
Note:
set "Leave profiles automatically" under
"User profiles". ~ "Menu settings"
on page 21