Bartscher 296215 Manuel D'installation, D'utilisation Et D'entretien page 28

ENGLISH
Version without the oven
Remove the cover from the terminal strip (A).
A
Connect the switch-off to the terminal strip (B)
of the device, as shown in the drawing and
block diagram (see the attachment). Use the
H07RN-F cable or better.
GB
Version with the oven
Remove the cover from the terminal strip
(A) (B).
A
B
Tighten the cable endings (C).
Replace the terminal strip cover.
B
C
Connect the switch-off to the terminal strip (C)
of the device as shown in the drawing and
block diagram (see the attachment). Use the
H07RN-F cable or better.
Tighten the cable ending (D).
Replace the terminal strip cover.
12
C
D