Denon Professional DN-F350 Guide D'utilisation page 9

Operation
Selecting the Media Playback Source
To select what kind of media you want to play:
To cycle through the available options, press the Source button.
• Line: device connected to the Mic/Line input (see
• SD: SD card, (see
Playing Audio Files on a SD Card)
• Aux: device connected to Aux In (see
• USB: USB device (mass storage class) (see
• Bluetooth (BT): Bluetooth device (see
Using the Mic/Line Input
To connect a line-level device or microphone to the Mic/Line input:
1. If the unit is off, press the Power button to power it on.
2. Connect a microphone or line-level device to the Mic/Line input. See
for mic-level or line-level signals.
3. Press the Source button and select Line as the media type (described in
4. Adjust the Mic Volume knob on DN-F350.
Playing Audio from a SD Card
To play audio files on a SD Card:
1. If the unit is off, press the Power button to power it on.
2. Insert the SD card into the SD card slot.
3. Select SD as your desired media type (described in
4. Select an audio file:
•
When a SD card is first connected, files on the root directory will be shown. Press and release the Master Volume
dial to open to the first folder. All files within that folder will appear first. All other playable content on the SD card will
appear after. To access another folder, press and release the Master Volume dial again.
•
To move through audio files, press the <</|<< and >>/>>| buttons on the unit.
For SD sources, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To stop playback, press the Stop button.
•
To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will rewind/fast-
forward at 5 times the normal playback speed. To resume playback, release the button.
•
To show different track information on the display, press the Display button. It will cycle through the file name and
other text information.
•
To select a Repeat Playback mode, press the Repeat button. It will cycle through Normal Mode (no tracks will repeat),
Repeat One (the same track will repeat indefinitely), Repeat Folder (tracks in the selected folder will repeat
indefinitely), and Repeat All
To select the Play mode, press the Random button. It will cycle through Single Play  (the current track will play until
•
its end and then stop), Normal Mode (all tracks will play through), Random Folder (the tracks will play from a random
folder), and Random All
•
To change the Time mode on the display, press the Time button. It will cycle through Elapsed (how much time has
elapsed of the current track) and Remaining (how much time remains for the current track).
•
To remove a SD card, gently push on the card to eject it when it is not playing. (Removing a SD card while it is playing
can damage it.)
Using the Mic/Line
Playing Audio from the Aux
Playing Audio Files On a USB Flash
Playing Audio from a Bluetooth
(the list of all tracks will repeat indefinitely).
(the tracks on the SD card will play in a random order [for up to 256 tracks]).
Input)
Input)
Device)
Operation > Additional Functions
Selecting the Media Playback
Selecting the Media Playback
Drive)
Source).
Source).
to set the input
9