Denon Professional DN-F350 Guide D'utilisation page 10

Playing Audio from the Aux Input
To play audio from an external device (e.g., smartphone, computer, portable music player, etc.) connected to the Aux
In:
1. If the unit is off, press the Power button to power it on.
2. Connect the 1/8" (3.5 mm) stereo/headphone output of your external device to the Aux In. Adjust the audio output control
on your external device.
3. Select Aux as the media type (described in
AUX Connected will appear on the display. If your external device is not connected, AUX Disconnect will appear on the
display.
Playing Audio Files on a USB Flash Drive
To play audio files on a USB mass-storage-class USB device:
1. If the unit is off, press the Power button to power it on.
2. Connect your USB device (mass storage class) to the USB Port.
3. Select USB as your desired media type (described in
4. Select an audio file:
•
When a mass-storage-class USB device is first connected, files on the root directory will be shown. Press and
release the Master Volume dial to open to the first folder. All files within that folder will appear first. All other playable
content on the flash drive will appear after. To access another folder, press and release the Master Volume dial
again.
•
To move through audio files, press the <</|<< and >>/>>| buttons.
For USB sources, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To stop playback, press the Stop button.
•
To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will rewind/fast-
forward at 5 times the normal playback speed. To resume playback, release the button.
•
To show different track information on the display, press the Display button. It will cycle through the file name and
other text information.
•
To select a Repeat Playback mode, press the Repeat button. It will cycle through Normal Mode (no tracks will repeat),
Repeat One (the same track will repeat indefinitely), Repeat Folder (tracks in the selected folder will repeat
indefinitely), and Repeat All
To select the Play mode, press the Random button. It will cycle through Single Play  (the current track will play until
•
its end and then stop), Normal Mode (all tracks will play through), Random Folder (the tracks will play from a random
folder), and Random All
•
To change the Time mode on the display, press the Time button. It will cycle through Elapsed (how much time has
elapsed of the current track) and Remaining (how much time remains for the current track).
•
To remove a USB device, gently remove it from the USB Port when it is not playing. (Removing a USB device while it is
playing can damage it.)
Playing Audio from a Bluetooth Device
To play Bluetooth tracks:
1. If the unit is off, press the Power button to power it on.
2. Select Bluetooth (BT) as the media type (described in Selecting the Media Playback Source).
3. Navigate to your Bluetooth device's setup screen, find "DN-F350" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
With Bluetooth sources, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To pause playback, press the Stop button.
•
To see a list of Bluetooth devices, press the Repeat button and use the Master Volume dial to navigate through the list
of Bluetooth devices. When you find one you want to pair to, select it by pressing the Master Volume dial.
•
To disconnect from a paired Bluetooth device, press and hold the Bluetooth Disconnect button for 1.5 seconds.
10
Selecting the Media Playback
(the list of all tracks will repeat indefinitely).
(the tracks on the USB device will play in a random order [for up to 256 tracks]).
Source). If your external device is connected,
Selecting the Media Playback Source).