Electrostatic Discharge - AudioSonic CL-500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
15. LIGHTNING - During lightning and longer periods of non-use please disconnect
from mains power supply and antenna.
16. SAFETY CHECK - After servicing the unit ask the customer service for a safety
check.
convenience receptacles.
18. ELECTROSTATIC DISCHARGE- Disconnect from mains power supply and
remove batteries if the unit malfunctions. Reconnect after a short time.
Setting a safe volume level
If you continually listen to loud music, your hearing gradually adapts to it and gives
you the impression that the volume is lower.
What seems normal to you can actually be damaging.
To protect yourself from this, set the volume to a low level.
Increase the volume slowly, until you can hear clearly and without problems.
Damage to your hearing can be extensive and cannot be reversed.
If you notice a hearing problem, please consult a doctor.
Installation
Avoid installing the player in areas of:
1.
direct sunlight or heating radiators or closed automobiles;
2.
high temperature or high humidity;
3.
excessive dust;
4.
excessive vibration, as the internal parts may be seriously damaged.
Stacking:
other equipment, which may heat up.
Mains Power Supply:
Check if the mains voltage as shown on the type plate (under the set) corresponds
to your local mains voltage. This unit is designed for AC 230V~50Hz.
Connect the mains lead to the AC mains socket and the wall outlet.
To disconnect from wall outlet only pull the plug and not the cable.
Hold the plug tight, when connecting to or disconnecting from wall outlet.
Do not touch the power cord with wet hands.
Protect the power cord from heat generating devices.
Please turn off the unit and contact an authorized customer service if it has been
dropped or is damaged otherwise.
GB-4

Publicité

Table des Matières
loading

Table des Matières