Table Des Matières; Unpacking - Sony SA-F11 Mode D'emploi

Welcome!
Thank you for purchasing the Sony
speaker system SA-F11.
The SA-F11 is an active speaker system
incorporating two front speakers and a
subwoofer.
When you connect this system to the
Sony CD/DVD player, DVP-F11, you
can enjoy 2.1-channel surround sound
even if you don't have a receiver
(amplifier).
Using the "VES (Virtual Enhanced
Surround)" mode in the on-screen menu
of the DVP-F11 allows you to enjoy
virtual 3D sound even without rear
speakers. For details on the virtual 3D
sound, refer to the instructions supplied
with the DVP-F11.
Other components you can connect this
speaker system to:
- A DVD player equipped with a 5.1-
channel output jacks and on which
you can select whether the speakers
are connected to the unit or not.
- A DVD player equipped with a 2.1-
channel (2 front speakers and a
subwoofer) outputs.
About This Manual
Before operating the unit, please read
this manual thoroughly and retain it for
future reference.
Convention
The following icons are used in this
manual:
Indicates that you can use the
Z
remote to do the task.
Indicates hints and tips for
z
making the task easier.
T
ABLE OF CONTENTS
Getting Started
Unpacking 3
Hooking Up the System 4
Basic Operations
Listening to the Sound 6
Adjusting the Sound 7
Operating Other Sony Components 8
Additional Information
Troubleshooting 9
Specifications 9

Unpacking

Check that you received the following items with your speaker system:
• Audio connecting cord, 1.5 m (1)
• Speaker connecting cords, 2.5 m (2)
• Remote commander (remote) (1)
• Sony R6 (size AA) batteries (2)
• Foot pads (12)
Inserting batteries into the remote
Insert two R6 (size AA) batteries with the polarity matched to the + and -
marks on the battery compartment. When using the remote, point it at the
remote sensor g on the subwoofer.
z
When to replace batteries
Under normal use, the batteries should last for about 6 months. When the
remote no longer operates the speakers, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing
so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the batteries
to avoid possible damage from battery leakage and corrosion.
GB
FR
DE
ES
NL
SE
IT
PT
NO
DK
FI
GB
3