Removal Of Parts; Technical Specifications; Structure; Dimensions - lopital Lotus Mode D'emploi

6. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.
7. Technical specifications
The Lotus is splash-proof. This is indicated by the IPX4 mark.

7.1. Structure

Frame:
Foot plates:
Weight:
Maximum permitted load:

7.2. Dimensions

Surface area:
24 | Instructions for use | Lotus Active standup aid
Stainless steel and steel tubes and plates that are
equipped with a two-layer powder coating
Plastic V0
35 kg / 77.2 lbs
200 kg / 440 lbs
Wide: 68 cm / 26.8 inch narrow position
95 cm / 37.4 inch with base spread out
Deep: 98 cm / 38.6 inch