Rotatable Sitting Parts; Cleaning And Maintenance - lopital Lotus Mode D'emploi

3.3. Rotatable sitting parts

The Lotus is equipped with 2 comfortable sitting parts that can be rotated away. Rotate
both parts away before rolling the Lotus towards the client (See figure 3). Have the client
stand on the Lotus. Ensure that he / she positions his / her legs in the centre of the
footplate and that the shins rest against the lower leg support. Now the client can pull
himself / herself up. Now, rotate the sitting parts back, thus enabling the client to sit
down (See figure 4).
Figure 3 Sitting parts rotated Figure 4 Sitting parts.
away.

4. Cleaning and maintenance

The Lotus must be cleaned after every use, with water and regular household cleaning
agents. PUR integrated foam components with IMC coating should be rubbed clean and
disinfected. Do not use any abrasive or other aggressive cleaning products. If necessary,
the PUR components can be disinfected with a solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the
lifespan of the PUR components. As a result of the material properties of PUR, contact
with sharp objects must be avoided. This could lead to damage or tears in the material.
Finally, we would like to point out that non-critical parts of the PUR components must
also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary.
Maintenance and repairs to the Lotus may only be carried out by authorised personnel.
22 | Instructions for use | Lotus Active standup aid