Working With The Lotus - lopital Lotus Mode D'emploi

2.2. Working with the Lotus

Step 1
Roll the Lotus towards the client and rotate the sitting parts away (See paragraph 3.3.
Rotatable sitting parts).
Step 2
Spread if necessary the base parts of the Lotus and roll it as close as possible to the
client. Have the client put his / her feet on the footrests. Make sure that the shins touch
the flexible lower leg supports (See paragraph 3.2. Base spreading).
Step 3
The Lotus must be put on the brakes before transferring persons (See paragraph 3.1.
Wheel blocking).
Step 4
The client can now stand upright. The client can take hold of the vertical hand grips to
lever himself / herself into a standing position.
Step 5
Turn the sitting parts away. Now the client can take place on the Lotus.
Step 6
Disengage the breaks if you wish to move the Lotus (See paragraph 3.1. Wheel brakes).
Step 7
If wanted, you can move the base spreader to the narrower position by pushing the
other pedal. Roll the client towards the (wheel)chair, toilet or bed (See paragraph 3.2.
Base spreading).
Step 8
Spread if necessary the base parts of the Lotus and roll it as far as possible to the
(wheel) chair, toilet or bed.
Step 9
The Lotus must be put on the brakes before transferring persons (See paragraph 3.1.
Wheel blocking).
20 | Instructions for use | Lotus Active standup aid