Storage And Transport; Removal Of Parts; Technical Specifications; Structure - lopital Tango XXL Mode D'emploi

5. Storage and transport

During transport and storage, the ambient conditions must remain moderate. In other
words, the temperature should remain between -40°C and +55°C (-40°F to 130°F) and
humidity levels should be kept as low as possible. Vibration during transport must be
kept to a minimum in order to avoid damaging the hinged mechanisms on the chair.

6. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally friendly manner.
7. Technical specifications
The Tango XXL is splash-proof. This is indicated by the IPX4 mark.

7.1. Structure

Frame:
Hinge points :
Wheels:
Body support :
Weight:
Maximum permitted load :

7.2. Dimensions

Surface area:
Seat height:
24 | Instructions for use | Tango XXL Shower-toilet chair
Stainless steel and steel tubes and plates that are
equipped with a two-layer powder coating
Stainless steel, cover caps made of plastic V0
Plastic, Ø 12.5 cm / 4.7 inch, double blocking facility
PUR (polyurethane).
31 kg / 68.3 lbs
360 kg / 800 lbs
83 cm wide / 32.7 inch, 101 cm / 39.8 inch deep
51 cm / 20.1 inch