Switching On The Machine - Duplex Nacecare TURBO Mop Manuel D'utilisation

DUPLEX TURBO
OPERATION AND USE
6.3

Switching on the machine

1) Press the ON/OFF switch 12 on the handle 13.
The switching on of the appliance is indicated by the lighting up of the LED 11 for 60
seconds. Depending on the colour, the LED indicates the battery's charge level.
2) Press the ON/OFF WATER 14 button to start to dispense water.
The blue LED 15 lights up to indicate that the machine is switched on:
• To dispense a small amount of water (ordinary cleaning) press the ON/OFF WATER
button 14: the flashing blue LED 15 indicates the set work mode.
• To dispense a large amount of water (pre-washing) press the ON/OFF WATER
button 14 twice: the fixed blue LED 15 indicates the set work mode.
3) Press the ON/OFF VACUUM button 16 to enable the vacuum.
4) If necessary, enable quiet mode by pressing the ON/OFF QUIET button 17. The green
LED 18 turns on to indicate that quiet mode is active.
5) Take hold of the handle and press the yellow safety lever 19 to start the appliance.
6) Release the yellow safety lever 119 to stop the appliance's motion.
CAUTION
In the event of interruptions or short work breaks, stop the power flow
by turning off the ON/OFF switch (12) to avoid discharging the battery.
12
15
18
14
17
16
106
13
11
19
F.40
Rev.
1.0