Connecting Other Devices - Sony Walkman D-NE520 Mode D'emploi

Connecting Other
Devices
You can listen to CDs through a stereo system
and record CDs on a MiniDisc or a cassette
tape. See the instruction manual that comes
with the device you want to connect.
Be sure to turn off all devices before making
the connections and changing the settings
explained below.
to i
(headphones)/
LINE OUT
Stereo system cassette
recorder, radio cassette
recorder, etc.
"LINE OUT" or "HEADPHONE" blinks for
about 5 seconds on the display of the player
when a connecting cord is connected.
You need to change the setting for "AUDIO
OUT" in the OPTION menu so that sound is
output to the connected device. The settings
of "AUDIO OUT" are shown below. To make
those settings, see  page 24-25.
Connecting cord
(minijack, not
supplied)
Left (white)
Right (red)
Connected device
Headphones
Device connected using the
connected cord
When you connect another device, set this
to "LINE OUT", When the setting is "LINE
OUT", volume cannot be adjusted using
either the player or the remote, and the sound
function does not work.
Notes
• Before you play a CD, turn down the volume
of the connected device to avoid damaging the
connected speaker.
• Use the AC power adaptor for recording. If you
use a dry battery as a power source, the battery
may become completely depleted in the middle
of recording.
• To record high quality CD sound, set
"G-PROTECTION" to "1" in the OPTION menu.
Setting
HEADPHONE
LINE OUT
27
GB