Prepare The Hood - Venmar C180 Série Directives D'installation, D'utilisation Et D'entretien

4. PREPARE THE HOOD

Remove both filters
Disassemble the adapter/damper (A) from the
hood.
NOTE: The bottom panel (B) must be removed
to access the adapter/damper.
Punch out the appropriate electrical knock-out hole.
Never use a hammer and a screwdriver to punch out the vertical or horizontal
discharge knock-out, because this will damage the hood internal parts.
HD0152
Using a long nose pliers, remove the knock-outs for the chosen opening (vertical on top or
horizontal at the back of the hood). See illustrations below.
V
ERTICAL
DISCHARGE
1
H
ORIZONTAL
DISCHARGE
1
HR0018
from the hood.
CAUTION
2
2
- 6 -
HO0055
A
3
3
B