Care - Venmar C180 Série Directives D'installation, D'utilisation Et D'entretien

10. CARE

The grease filters, bottom panel, intake
ring(s) (A) and blower wheel(s) (B)
should be cleaned frequently. Use a
warm detergent solution. The grease
filters, intake ring(s) and blower wheel(s)
are dishwasher safe.
NOTE: Some minerals, when in contact
with dishwasher soap additives,
may cause filters discoloration.
This discoloration is not covered
by the warranty.
To remove a blower wheel, first take off
its intake ring. Then remove the
blower wheel by pulling it down smoothly.
NOTE: Do not try to remove the black part (C) attached to the bottom panel.
When reinstalling the blower wheel(s),
make sure the small tab (D) will fit into
one hole of the motor(s).
S
TAINLESS STEEL CLEANING
Do:
• Regularly wash surfaces with clean cloth or
rag soaked with warm water and mild soap
or liquid dish detergent.
• Always clean in the direction of original
polish lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe completely dry.
• You may also use a specialized household
stainless steel cleaner.
HD0155
HD0156
:
C
Don't:
• Use any steel or stainless steel wool or any
other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction
residues reach the hood. During construction
or renovation, cover the hood to make sure
no dust adheres to stainless steel surface.
- 10 -
A
B
D