Eaton Cooper Lighting IRiS P3MR Instructions D'installation page 5

Socket Holder
Lens Holder
Lens
Snoot
Figure 9
Figure 9.1
Figure 9.2
Field replacement of MR16 lamp socket
(MRSKT16). (Figure 9.1-12)
Step 1
Remove the lamp module assembly from adjustment
bracket (Figure 12).
Step 2
Unscrew lens holder form lamp holder by rotating
counter clockwise to access socket connections. Install
lamp (Figure 9.1) and reassemble lens holder to lamp.
holder tightening finger tight.
Step 3
Insert Lamp module assembly into adjustment bracket
(Figure 10).
P3MR Recessed Housing Platform 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 www.eaton.com
2 Pin Male
Connector
MR16
(Not Included)
P3MR Recessed Housing Platform
Pointer
Figure 10
Hot Aiming (Figure 11 - 11.2)
Step 1
For rotation, loosen the locking screw (Figure 11).
Step 2
Rotate clockwise or counterclockwise using the locking
screw or by inserting a screwdriver in the screwdriver
opening.
Step 3
Tighten down the locking screw.
Step 4
For 0° to 45° adjustment, use adjustment screw to hot
aim the lamp (Figure 11.1). Adjustment angle is shown
by the pointer (Figure 11.2).
Figure 11
Figure 11.1
Screw Retainer Clip
Clamper
Adjustment Screw
Adjustment Screw
5