Disclaimer - CDVI CAA480A Série Manuel D'installation

INSTALLATION MANUAL
CAA480A
Elevator Controller
!
Disconnect AC and battery power before wiring the DRM to the CAA480A.
*The elevator control system may provide a positive or negative button control
!
voltage. The appropriate fl oor selection input will need to be wired to refl ect this.
The above diagram shows it wired for a positivebutton control input.

18] DISCLAIMER

It is very important that a trained and registered elevator service company connect wiring
associated with any component of the elevator system, this includes
the wiring of the CAA480A Elevator Controller's fl oor control relay terminals.
Under no circumstances does Paradox or any associated company accept
any liability for the improper installation or commissioning of a CAA480A
Elevator Controller.
It is the responsibility of the installation company and the elevator company
to ensure the personal safety of occupants using the elevator.
We recommend that the system uses the fi re control from the fi re switch used
on the elevator and that the Standard Button Control (Fail Safe Method) described on page 8
be incorporated into the system. This ensures operation regardless
of the situation and gives the ability to manually bypass all fl oor security
in the event of a fi re or system trouble.