Fracarro 3DGFLEX Instructions D'emploi page 28

From this window, you can choose the module where you want to upload a configuration that
was saved in PC file or in the USB. Select the file with the configuration you have saved and
upload it ("Upload configuration").
From the green bar of options at the top, select "operations"  "factory default" or "opera-
tion"  "restart" to start the module again or reset the unit to the factory's settings.
4.3 REMOTE MANAGEMENT OF THE HEADEND
PREAMBLE: to manage the 3DGflex remotely (via Internet), you must know the network
structure to which the headend is inserted. Other devices, such as network switches, fi-
rewall and server proxy (hardware or software), configurations or addressing regulations
and routing tables, might compromise the correct remote management of the installation.
These local settings will be performed by the administrator of the network where the mo-
dule will be installed.
All modules belonging to the headend can be interrogated by the WAN (Internet) network:
• in order to monitor the correct operation and
• in order to re-program the headend remotely
These operations can be performed only after the modules were set in accordance with
their operating instructions and after the headend is inserted in the local LAN network
correctly.
The procedure for managing the 3DGflex remotely is as follows:
1. Create the correct re-addressing of the headend by setting the NAT/PAT regulations in
the router so that each module will be visible by the WEB network:
2. Through the Internet browser (i.e. Google Chrome, Mozilla Firefox, etc.), call back the
public static IP address associated to the router followed by the number of the port
associated to the module to manage.
28