Before You Begin - Kohler Sterling 660SP Série Guide D'installation Et D'entretien

Table des Matières

Publicité

Tools/Outils/Herramientas
Silicone Sealant
Masking Tape
Joint en silicone
Ruban-cache
Sellador de silicona
Cinta de enmascarar

Before You Begin

WARNING: Risk of serious injury. Damage prior to installation can result in
glass shattering. Inspect the glass and all parts for damage before installation.
WARNING: Risk of serious injury. Improper installation can result in glass
shattering. Follow all installation instructions.
NOTICE: Do not touch the edges of the tempered glass with tools or any other hard
objects. Do not set the unframed tempered glass directly on the floor or any hard
surface.
WARNING: Risk of serious injury. Do not cut tempered glass. Tempered glass
will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels can shatter.
Regularly inspect the glass and all parts for damage, missing or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses while cutting and
drilling.
IMPORTANT! Leave this manual for the end user. Read these instruction before
installing or using this product.
IMPORTANT! If you purchased model 660B/SP, this bypass bath/shower door
includes two sets of wall jambs, tapered and non-tapered. If you are installing the
door to a Sterling bath/shower unit or a unit with a taper in the lower wall, use the
tapered set. For all other bath units, use the non-tapered set. Discard the unused set.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8"
(10 mm) out of plumb. Verify the area the door will be attached to is within 3/8" (10
mm) or better of plumb. The door may not function properly if the wall is more than
3/8" (10 mm) out of plumb.
Before beginning the installation, measure the dimensions of the opening and
confirm the model of door you are installing is the correct size.
Use a drop cloth to protect the floor surface of the bath or shower during the
installation.
1113654-2-E
Plus/Plus/Más:
• Drop Cloth/Toile de protection/Lona
Hacksaw with 32 Teeth
per Inch Blade
Scie à métaux avec lame
à 32 dents par pouce
Center Punch
Poinçon
Sierra para metales con hoja
Punzón
de 32 dientes por pulgada
2
Sterling

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sterling 660b/sp-46sSterling 660b/sp-59s

Table des Matières