Olimpia splendid PELER TOWER Instructions Pour L'installation, L'emploi Et L'entretien page 51

3.4.c - Appliance rotation key (A5)
With the appliance running, by pressing the key (A5), the appliance body
starts to swing.
By pressing the key again, the function switches off.
3.4.d - mode key (A6)
When the appliance is switched on, "normal" mode is set by default.
Press this key and the mode changes according to this sequence:
Normal ---> Natural ---> Sleep (sleeping) ---> Normal ---> Natural ---> ...
The mode LED changes accordingly (the "natural" (B2) and "sleep" (B3) modes
are not available at "silent" speed (B4)).
The various modes work as follows:
1 - Normal (B2): the appliance works constantly at the set speed.
2 - Natural (B3): the appliance works changing air speed continuous-
3 - Sleep (B4):
3.4.e - Timer key (A4)
When the appliance is on, press this key and the timer changes according to
this sequence:
0h (off) ---> 1h ---> 2h ---> 3h ---> .. 12h ---> 0h (off) --->
3.4.f Cooler/humidifier key
• When the appliance is on, to start the cooling/humidification function:
- press the "A2" key on the appliance command panel once or press the
"A2" key on the remote control. LED "B5" switches on.
• To switch the function off:
- press the "A2" key on the appliance command panel three times or press
the "A2" key on the remote control once. LED "B5" switches off.
ly.
the appliance works changing air speed continuous-
ly, reducing it down to the minimum value.
..
EN - 18
PELER TOWER