Installation; Handling The Appliance - Olimpia splendid PELER TOWER Instructions Pour L'installation, L'emploi Et L'entretien

2 - INSTALLATION

2.1 - hANDLING ThE APPLIANCE

• Transport and handling of the appliance must be carried out in ver-
tical position.
•
Rotate the appliance into horizontal position and mount the base (3),
as illustrated in figure B1.
CAUTION
Moving the cooler on delicate flooring (e.g. wooden flooring):
• Empty the water compartments.
• Take great care when moving the cooler as the wheels could mark
the flooring. Although the wheels are made from a rigid material
and are swivelling, they could get damaged by use or excessive
dirt.
It is recommended to check that the wheels are clean and that
they can move freely.
2.2 - WARNINGS
A failure to respect what follows may cause damages to the
appliance.
a. Install the appliance on a flat, stable
surface and on the floor.
b. The appliance must only be connected
to earthed power outlets.
c. Make sure that curtains or other objects
do not obstruct the air suction filters.
d. Make sure to keep a minimum distance
of 15 cm (Fig.B) between the cooler and
the adjacent figures.
EN - 11