Hach 8398 Série Manuel D'utilisation page 7

Polymetron inductive conductivity sensors
Masquer les pouces Voir aussi pour 8398 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
5. Rinse the sensor with water and then return to the soap solution for 2 to 3 minutes.
6. Rinse the sensor with clean water.
Always calibrate the sensor after maintenance procedures.
Section 5 Replacement parts and accessories
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Sensors
Description
2 electrode conductivity sensor K=0.01, ¾ inch NPT thread
2 electrode conductivity sensor K=0.1, ¾ inch NPT thread
2 electrode conductivity sensor K=1, ¾ inch NPT thread
2 electrode conductivity sensor K=0.01, ¾ inch NPT thread
2 electrode conductivity sensor K=0.01, for Yokogawa flow chamber
2 electrode conductivity sensor K=0.01, ¾ inch G thread
2 electrode conductivity sensor K=0.1, ¾ inch NPT thread
2 electrode conductivity sensor K=1, ¾ inch NPT thread
2 electrode conductivity sensor K=0.01, 1½ inch (38 mm) clamp
2 electrode conductivity sensor K=0.01, 1½ inch (38 mm) clamp with certificate of
conformity
2 electrode conductivity sensor K=0.01, 2 inch (51 mm) clamp
2 electrode conductivity sensor K=0.01, 2 inch (51 mm) clamp with certificate of
conformity
Cables
Description
Female connector 6+T with connection drawing
5 m cable and IP65 connector for 2 electrode conductivity sensor
10 m cable and IP65 connector for 2 electrode conductivity sensor
20 m cable and IP65 connector for 2 electrode conductivity sensor
Shielded 4 conductor cable (per meter)
30 m cable and IP65 connector for 2 electrode conductivity sensor
Flow chambers
Description
PVC flow chamber with 3 X ¾ FNPT bores
Stainless steel flow chamber with 1 X ¾ FNPT bore + 2 X ¼ FNPT bores
Kit for 8394 1½ inch clamp with EPDM gasket, clamp and 316L SS flow chamber
Kit for 8394 2 inch clamp with EPDM gasket, clamp and 316LL flow chamber
Item no.
08310=A=0000
08311=A=0000
08312=A=0000
08315=A=0000
08315=A=0002
08315=A=1111
08316=A=0000
08317=A=0000
08394=A=1500
08394=A=1511
08394=A=2000
08394=A=2011
Item no.
08319=A=0000
08319=A=0005
08319=A=0010
08319=A=0020
588800,29050
91010=A=0144
Item no.
08313=A=0001
08318=A=0001
08394=A=8150
08394=A=8200
English 7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8332

Table des Matières