Adjusting Your Rubber Strap - Doxa SUB 200 Mode D'emploi

ADJUSTING YOUR RUBBER STRAP

1.
Detach the clasp from the strap
by removing the spring bar at the end
of each half of the strap.
Example 1:
Even overlap with 6 holes.
6 divided by 2 equals 3, plus 1 hole at
each end, equals 5. Trim both halves
at the 5 hole.
th
20
2.
For the proper strap length, overlap
both halves around your wrist. Count the
number of holes and divide by 2. Add
1 hole at each end for the clasp. You now
have the correct length to trim to.
Example 2:
Odd overlap with 5 holes.
5 divided by 2 equals 2.5, plus 1 hole at
each end, equals 4.5. Trim at the 5
on the 12 o'clock half, and at the 4
on the 6 o'clock half.
hole
th
hole
th