Doxa SUB 200 Mode D'emploi page 16

6 HANDS, CHRONOGRAPH,
3 COUNTERS, AUTOMATIC
Your SUB 200 C-GRAPH
(6 hands, chronograph,
automatic) is powered by
a Swiss automatic
movement that draws its
energy from the natural
motion of your wrist. It
features a screw-down
crown with a seal to
ensure water-tightness.
You can set the time
depending on the
crown's position (P2).
P0: Secure Crown
In position P0, the crown
is tightly screwed down
against the case. In this
position, the case is
protected against water
or other foreign matter
ingress.
P1: Wind Manually
Unscrew the crown from
position P0 – by turning
it counterclockwise
– until it clicks to the first
16
stop (P1). Then turn the
crown clockwise for
about 40 turns. Your
DOXA SUB will now
automatically remain
powered up as long as
you wear it. When it is
completely wound, your
SUB will have a power
reserve of about
45 hours. This means it
will keep going for that
amount of time without
having to be wound up
or worn.
P2: Set Time
Starting from P1, gently
pull the crown out one
more stop to P2. Set the
time by turning the
crown counterclockwise.
To return to P0, press the
crown against the case
and – while keeping
pressure on the crown
– turn it clockwise. Make
sure it's screwed down
tight for a perfect seal.
Chronograph
The chronograph
function comprises the
stopwatch, a 30-minute
counter at 3 o'clock and
a 12-hour counter at
6 o'clock. These counters
are activated by pressing
the pusher C1 while the
60-second (at 9 o'clock)
counter operates
continuously. To track
the elapsed time with
the chronograph:
1.
Press pusher C1 to start
the chronograph
2. Press pusher C1 again
to stop the chronograph
3. Press pusher C2 to
reset the chronograph.