Hands, Date, Automatic - Doxa SUB 200 Mode D'emploi

3 HANDS, DATE, AUTOMATIC

Your SUB (3 hands, date,
automatic) is equipped
with a Swiss automatic
movement that draws
energy from the natural
motion of your wrist.
It has a screw-down
crown with a seal to
ensure water-tightness.
You can set the time and
date depending on the
crown's position (P).
P0: Secure Crown
In position P0, the crown
is tightly screwed down
against the case. Always
keep it that way to
effectively protect the
movement against water
or other foreign matter
ingress.
10
P1: Wind Manually
Unscrew the crown from
P0 by turning it
counterclockwise. When
it has been completely
unscrewed, it will click out
one stop to P1 for manual
winding. Gently give the
crown a good number
of turns clockwise until
you feel a slight resistance
(between 30 and 50 turns
– NEVER FORCE THE
CROWN). Your watch is
now sufficiently wound to
keep powered up
automatically
("self-winding") as long as
you wear it. When fully
wound, your SUB has a
power reserve of about
38 hours, i.e. unless
wound or worn it will run
out of energy in that time.
P2: Set Date
Starting from P1, gently
pull out the crown one
stop to position P2. Turn it
clockwise to set the date.
For months with fewer
than 31 days, manually
advance the date to the
first of the next month.
P3: Set Time
Starting from P2, gently
pull the crown out one
more stop to P3
(outermost position).
Set the time by turning
the crown counterclock-
wise. To return to P0,
gently push the crown
back against the case
until you feel resistance.
While keeping pressure
on the crown, turn
clockwise (do not apply
excessive force) until it's
screwed down tight for
a perfect seal.