Installation Of The Outdoor Unit - Sygonix 1656670 Notice D'emploi

d) Installation of the outdoor unit
• First turn out the two attachment screws (19) for the front plate with a Phillips-head screwdriver, see figure "A".
• Carefully push a flat screwdriver into the two openings, see figure "B"; this loosens the clamp holder of the front
plate.
Fold up the front plate a little (C) and take it off.
• Guide the connection cables through the rubber seal (26).
• Attach the outdoor unit to the wall with two suitable screws and, if required, dowels. The camera must be on top
as shown in the figure.
34