User Information - ABL Wallbox eMH1 Mode D'emploi Et Consignes De Sécurité

20
| Wallbox eMH1 – User information
NOTE
Duty to Notify
Please note that electrical grid operators, energy suppliers or national regulations may require notifica-
tion of or approval for the installation or operation of a charging station.
ƒ Ensure that the rated voltage and rated current of the product comply with the parameters of your
local electricity grid and that the rated output is not exceeded during operation.
ƒ The product must only be operated after final approval by a qualified specialist electrical contractor.
ƒ In case of installation faults, or malfunctions that can be traced back to faulty installation, always
contact the contractor who carried out the installation first.
ƒ The product must not be covered with stickers or other objects or materials.
ƒ No liquids or receptacles containing liquids must be placed on the product.
ƒ Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the product may
lead to malfunctions.
ƒ This product is not intended to be used by persons (including children) with limited physical, sensory
or mental abilities or lack of experience and/or knowledge, unless they are supervised by someone
responsible for their safety or they have received instructions on how to use the product.
ƒ Children must be supervised so that they do not play with the product.
ƒ Do not under any circumstances make alterations to the product. Any violation of this instruction
constitutes a safety risk, fundamentally breaches the guarantee provisions and may void the warranty
with immediate effect.
ƒ Malfunctions affecting the safety of persons, connected electric devices or the device itself must be
resolved by a qualified specialist electrical contractor.
ƒ Should one of the following malfunctions occur, please contact your electrician:
y The product housing has been damaged mechanically, or the housing cover has been removed or
can no longer be closed.
y The product does not function properly.
y The charging socket, the fixed charging cable or its charging coupler is visibly damaged or no
longer functions correctly.

User information

ƒ Local safety regulations regarding the operation of electrical devices for the country in which you
operate the product always apply.
ƒ To disconnect the product completely from the electricity grid, the power supply must be interrupted
using the upstream safety switches and fault current protection devices in the domestic power
distribution.
ƒ Ensure that the charging cable is not subjected to tensile stress at any time.
ƒ Make sure that the product is always closed and locked when in use.
ƒ Ensure that the charging cable is not driven over, kinked or pinched. Always treat charging plugs,
connectors and sockets with special care.