SilverCrest SV 125 C3 Mode D'emploi page 19

NOTE
► You can order suitable bags and containers separately. Please refer to
section "Ordering spare parts and accessories".
The vacuum hoses u and adapters i/o/p are also compatible with
►
bags and containers made by other manufacturers.
Adapters
Adapter A i
Adapter B o
Adapter C p
Vacuuming sealing bags
1) Connect the vacuum hose u onto the suction fitting
2) Select the appropriate adapter A/B i/o for the bag you want to vacuum
and attach it to the vacuum hose u.
3) Close the appliance lid 1. Ensure that both corners of the appliance lid 1
click closed. If necessary, press them down once again on the markings
and
4) Close the bag to be vacuum sealed carefully. Vacuum sealing only works
properly if the bag is completely closed off. Position the bag so that the
extraction opening of the bag is lying on a smooth surface.
5) Press the adapters A/B i/o firmly onto the round extraction opening on
the bag.
6) Press the
sucks the air out of the bag. As soon as all the air is sucked out, the control
lamp z goes out.
7) You can now remove the adapter A/B i/o from the bag.
Vacuum sealing containers
1) Connect the vacuum hose u onto the suction fitting
2) Select the appropriate adapter i/o/p for the container you want to
vacuum and attach it to the vacuum hose u.
■ 16 │ GB │ IE
so that the appliance lid 1 clicks into place and locks shut.
button z. The control lamp z lights up and the appliance
e.g. suitable for
FoodSaver lunch boxes, Ernesto, various
bags with a valve
FoodSaver food storage boxes, Ernesto,
various bags with a valve
CASO, FoodSaver storage boxes
9 of the appliance.
9 of the appliance.
SV 125 C3