Functions Setup; Uf-1 Internal Value; Check Weighing - Gram CM Série Manuel D'utilisation

weighing mode.
Span Calibration ECF-3
1. Press the
menu and return back to weighing mode.
2. Use ◄, ►, ▲, 0 ~ 9 keys to enter the calibration weight value and then confirm with
the key.
4. Place the required weight mass onto the scale as indicated on display and press
the to calibrate the scale.
5. The scale will complete the calibration automatically and will return back to
weighing mode.

FUNCTIONS SETUP

In order to access functions setup, keep pressed the
press the key.

UF-1 Internal value

1. Press the
2. To continue with other setups use the ► key.
3. To exit menu and return back to weighing mode, press the
UF-2

Check weighing

1. Press the
2. The display will show the message "0000.0L"
3. Use ◄, ►, ▲, 0 ~ 9 keys to set LO weight value.
4. Press the
5. The display will show the message "0000.0H"
6. Use the ◄, ►, ▲, 0 ~ 9 keys to set HI weight value.
7. Press the
8. The display will show the message "O 000"
9. Use the ◄, ►, ▲, 0 ~ 9 keys to set I/O SET value.
10. Press the
11. To continue with other setups use the ► key.
12. To exit menu and return back to weighing mode, press the
key to start Span Calibration ECF-3 or the
key to see the internal value.
key to start check weighing setup.
key to confirm.
key to confirm.
key to confirm.
key to exit the
and without release it,
key.
key.
9