Configuration - Thermador Professional PCG30 Manuel D'installation

Consider Make-Up Air:
• Due to the high volume of ventilation air, a source of
outside replacement air is recommended. This is
particularly important for tightly sealed and insulated
homes.
• A qualified heating and ventilating contractor should be
consulted.
Cooktop
Width

Configuration

30" 4 burners
4 burners with griddle
36"
6 burners
48" 6 burners with griddle
Important Notes:
• It is recommended that a Thermador Professional wall or island hood or custom insert is used with Thermador
Professional Cooktops.
• Refer to www.Thermador.com for a complete selection of Professional Ventilation options, Blowers, and
Accessories.
• * For high output gas cooktops (60,000 BTU or greater), the minimum of one (1) CFM of ventilation per 100 BTU is
recommended. If the cooktop has a griddle, add 200 CFM to the estimated blower capacity. Additional blower
capacity may be required for longer duct runs.
• For island applications, it is recommended to use a hood width that exceeds the width of the cooktop by 6"
(overlapping the cooktop by 3" on each end).
• **Not all 48" Pro Wall Hood models can accommodate a 1300 CFM blower option.
• CFM = "cubic feet per minute" (standard blower capacity rating).
English 4
Cooktop Minimum Recommended
Blower Capacity*
NOTE:
Ventilation hoods and blowers are designed for use with
single-wall ducting. Some local building codes may require
double-wall ducting. Before starting installation, consult
local building codes and agencies to insure that the
installation will meet local requirements.
30" or 36" Pro Wall Hood
800 CFM 30" or 36" Custom Insert w/ optional blower
42" Island Hood w/ optional blower
1000 CFM 36" or 42" Pro Wall Hood
36" Custom Insert w/ optional blower
1100 CFM
42" or 48" Island Hood w/ optional blower
48"** or 54" Pro Wall Hood
1300 CFM 48" Custom Insert w/ optional blower
54" Island Hood w/ optional blower
Ventilation Options