Extended Warranty; Basic Operation - Timex Expedition Digital Mode D'emploi

Masquer les pouces Voir aussi pour Expedition Digital:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,
Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
watch. Your model may not have all of the features described in this
booklet.
FEATURES
• Time with 12- or 24-hour format
• Date with MM-DD or DD.MM format
• 3 time zones
• Alerts with audible tone and/or silent vibration
• Optional hourly chime
• 100-hour chronograph with display of lap and split times
• 24-hour countdown timer (count down and stop or repeat)
• Hydration timer
• 3 daily/weekday/weekend alarms with 5-minute backup
• Customizable mode set (hide unwanted modes.
• INDIGLO
night-light with NIGHT-MODE
®
Press MODE repeatedly to step through modes: Chrono, Timer, Hydration,
Alarm 1, Alarm 2, and Alarm 3. Press MODE to exit current mode and return
to Time mode.
Model Number: 056

BASIC OPERATION

SET
(DONE)
MODE
(NEXT)
SET
(DONE)
MODE
(NEXT)
Button functions shown with secondary functions in parentheses.
Watch displays may vary. Button operations are the same.
TIME
To set time, date, and options:
1. With time and date showing, press and hold SET.
2. Current time zone (1, 2, or 3) flashes. Press + or – to select time zone to
set, if desired.
3. Press NEXT. Hour flashes. Press + or – to change hour (including AM/
PM); hold button to scan values
4. Press NEXT. Minutes flash. Press + or – to change minutes
5. Press NEXT. Seconds flash. Press + or – to set seconds to zero.
6. Press NEXT. Month flashes. Press + or – to change month.
feature
®
START·SPLIT
(+)
INDIGLO
®
BUTTON
STOP·RESET
(–)
START·SPLIT
(+)
INDIGLO
®
BUTTON
STOP·RESET
(–)
7. Press NEXT. Day flashes. Press + or – to change day.
8. Press NEXT. Year flashes. Press + or – to change year.
9. Press NEXT to set options. Press + or – to change value and then press
NEXT to go to next option. Available options are 12- or 24-hour time
format, MMM-DD or DD.MMM date format, tone or vibration alert, hourly
chime, beep for button presses, customizable mode set (Select "HIDE"
for unwanted modes — they are removed from mode sequence). Press
DONE at any step to exit and save settings.
®
If you hide a mode, you can turn it back on later using procedure above.
Press START·SPLIT once and hold to see 2nd time zone. Press
START·SPLIT twice and hold to see third time zone. Continue to hold button
for 4 seconds to switch to displayed time zone.
Dual mode offers choice of alert type for alarms and countdown time: audi-
ble tone, silent vibration or combination of vibration followed by tone. To set,
refer to point 9.
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function. Press MODE to go
to Chrono mode.
To start, press START·SPLIT. Chrono counts up by hundredths of a second
up to one hour, then by seconds up to 100 hours. Chrono indicator in sub-di-
al flashes to indicate chrono is running.
To stop, press STOP·RESET. Chrono indicator in sub-dial is solid to indicate
chrono is stopped.
To resume, press START·SPLIT, or to reset (clear) chrono, press and hold
STOP·RESET.
When chrono is already running, chrono continues to run if you exit mode.
Stopwatch icon w appears in TIME mode.
While chrono is running, press START·SPLIT to take a split. Lap and split
times will be displayed with lap number.
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
To set display format, press SET. Then, press + or – to select desired for-
mat. Press DONE to exit.
NOTE:
• When a split is taken, times are frozen on the display for 10 seconds.
Press MODE to release display and show running chrono immediately.
TIMER
Timer mode provides a countdown timer with alert. Press MODE repeatedly
until TIMER appears.
To set countdown time:
1. Press SET. Hours flash. Press + or – to change hours; hold button to scan
values.
2. Press NEXT. Minutes flash. Press + or – to change minutes.
3. Press NEXT. Seconds flash. Press + or – to change seconds.
4. Press NEXT. Action at end of countdown flashes. Press + or – to select
STOP or REPEAT.
5. Press DONE at any step when done setting.
To start timer, press START·SPLIT. Timer counts down every second from
countdown time. Timer indicator in sub-dial flashes to indicate timer is
running.
To pause countdown, press STOP·RESET. Timer indicator in sub-dial is
solid to indicate timer is stopped.
To resume countdown, press START·SPLIT, or to reset countdown, press
STOP·RESET.
Watch beeps and night-light flashes when countdown ends
(timer reaches zero). Press any button to silence. If REPEAT AT END
s elected, timer repeats countdown indefinitely.
1
ENGLISH 056-095000
LAP 3 = 7.08
LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39

Publicité

Table des Matières
loading

Table des Matières