Guide To On-Screen Display Operation - Sony STR-DA1800ES Mode D'emploi

2
Press V/v repeatedly to select
"Auto", then press
The proxy setting display appears on the
TV screen.
When using a fixed IP address
Select "Manual", then press
address input display appears on the TV
screen.
Press SHIFT, then press numeric button
to enter the value for "IP Address", and
then press . Then, enter the value for
"Subnet Mask", "Default Gateway",
"Primary DNS" and "Secondary DNS".
The proxy setting display appears on the
TV screen.
3
Press V/v repeatedly to select
"Do Not Use", then press
The confirmation display appears on the
TV screen.
When using a proxy server
Select "Use", then press
address input display appears on the TV
screen.
Press SHIFT, then press numeric/text
button to enter the value for "Proxy
Address", and then press
the value for "Port Number".
The confirmation display appears on the
TV screen.
4
Press V/v repeatedly to select
"OK", then press
"Connecting" appears on the TV screen.
"Complete!" appears after the network
settings are completed. To return to the
Network Settings menu, press
(Depending on the network environment,
the network settings may take some time.)
5
Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 70).
US
52
Tip
When checking the network settings, see "To check
.
the network information" (page 104).
Guide to on-screen
. The IP
display operation
You can display the menu of the receiver on
the TV screen and select the function you want
to use on the TV screen by pressing V/v/B/b
and
To display the menu of the receiver on the TV
screen, make sure that the receiver is in "GUI
MODE" following the steps in "To turn "GUI
MODE" on and off" (page 53).
.
RETURN/
. The proxy
EXIT O
. Then, enter
Using the menu
1
.
.
on the remote control.
Switch the input of the TV so
that an image of the menu is
displayed.
GUI MODE
V/v/B/b,
TOOLS/
OPTIONS
MENU