Sony STR-DA1800ES Mode D'emploi page 112

Menu Parameters
[Display] [Display]
System settings 12V Trigger control
[<SYSTEM>] [12V TRIG.]
RS232 control
[RS232C]
Auto standby mode
[AUTO STBY]
Naming inputs
[NAME IN]
a)
You can select this setting only when you have performed the Auto Calibration and saved the settings.
b)
Depends on the speaker pattern setting, some parameters or settings may not be available.
c)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
d)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back or front high
speakers (page 42).
e)
You can only adjust the distance in 0.01 meter interval when you have performed the Auto Calibration and
saved the measurement result.
f)
You can only select this parameter if your speaker is set to "SMALL".
g)
You can only select this parameter if you select "HD-D.C.S." as sound field.
h)
You can only select this parameter when a Bluetooth device is paired.
US
112
Settings
HDMI A, HDMI B, INPUT, ZONE,
CTRL, OFF
RS232C ON, RS232C OFF
STBY ON, STBY OFF
For details, see "Naming the input
(Name Input)" (page 55).
Default
setting
OFF
RS232C OFF
STBY ON