Sony STR-DA1800ES Mode D'emploi page 114

Masquer les pouces Voir aussi pour STR-DA1800ES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3
Press the numeric buttons to
enter the numeric code.
If more than one code exists, try to enter
either one which corresponds to the
equipment including TV.
Use the tables on page 114–117 to find
the numeric code(s) corresponding to the
equipment.
Note
Only the codes in the 500's are valid for the TV
button.
4
Press ENT/MEM.
Once the numeric code has been verified,
the RM SET UP button slowly flashes
twice and the remote control
automatically exits the programming
mode.
5
Repeat steps 1 to 4 to program
other equipment.
Note
The RM SET UP button turns off while a numeric
button is pressed.
To cancel programming
Press RM SET UP during any step. The
remote control automatically exits the
programming mode.
To activate the input after
programming
Press the programmed button to activate the
input you want.
If programming is
unsuccessful, check the
following:
• If the RM SET UP button does not light up
in step 1, the batteries are weak. Replace
both batteries.
• If the RM SET UP button flashes 5 times in
quick succession while entering the numeric
code, an error has occurred.
Start again from step 1.
US
114
The numeric codes
corresponding to the equipment
and the maker of the equipment
Use the numeric codes in the tables below to
program non-Sony equipment and also Sony
equipment that the remote control is normally
unable to control. Since the signal from the
remote control received by the equipment
differs by its model and the year, more than
one numeric code may be assigned to the
equipment. If you fail to program your remote
control using one of the codes, try using other
codes.
Notes
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your equipment will not
respond to some or all of the codes.
• All of the input buttons on this remote control may
not be available when used with your particular
equipment.
To control a CD player
Maker
SONY
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
ONKYO
PANASONIC
PHILIPS
PIONEER
TECHNICS
YAMAHA
To control a DAT deck
Maker
SONY
PIONEER
Code(s)
101, 102, 103
104, 123
105, 106, 107
108, 109, 110
111, 116
116
112, 113, 114
115
116
117
115, 118, 119
120, 121, 122
Code(s)
203
219

Publicité

Chapitres

Table des Matières
loading

Table des Matières